In this guide, you’ll discover a step-by-step process for cleaning your RC car, so let’s dive in!
As a Traxxas RC car owner, I used to neglect cleaning my cars after every session. Whether I was driving through dust or mud, I would simply leave them in the garage without a second thought.
Unfortunately, this habit didn’t end well. Many of my cars experienced a significant drop in performance, and in some cases, I had to replace parts that were damaged due to poor maintenance.
At first, I didn’t understand why this was happening. I assumed RC cars were just naturally prone to wear and tear and adjusted my expectations accordingly. That is, until…
A friend asked me, “You don’t clean your RC car?” I replied, “Who actually does that?”
Thankfully, my friend introduced me to the importance of cleaning an RC car, a crucial step I had been overlooking.
Now, I’m here to share with you the complete process of cleaning an RC car, from start to finish, using minimal effort and basic tools.
Read Also: Traxxas Slash 4×4 Ultimate – What Makes It the Best Traxxas Slash?
Step 1: Prepare Your Cleaning Area
Before you begin, make sure the area you’re working in is clean and free of any unrelated RC car parts that could get mixed up. Also, remove some components, like the battery and wheels. If there’s large debris stuck in the car, you can quickly dislodge it by flipping the RC car upside down and shaking it out.
Your chance to win starts now!
Buy your ticket now and be one step closer to winning a Traxxas X-Maxx car before the draw on [December 29, 2024, at 10:32 PM].
Read Also: Is the Traxxas slash 2WD the best Traxxas RC car?
Step 2: Remove Excess Dirt and Debris
Start by clearing off any loose dirt and debris from the car. A soft brush or compressed air canister works well for this. Pay special attention to the wheels, the underside of the chassis, and the body of the car.
Step 3: Remove the Wheels
If you haven’t already taken the wheels off, now is the time! If you’re new to this, don’t worry—it’s easy. Just unscrew them from the axles and set them aside.
Step 4: Clean the Wheels
Using a brush or a damp cloth, thoroughly clean the wheels, making sure to get rid of any debris caught in the treads. While cleaning, inspect the wheels for any damage. If you notice any, it’s better to replace the wheels rather than attempt to repair them.
Step 5: Clean the Body
Next, clean the car’s body using a damp cloth or sponge. Scrub away any stubborn dirt or grime that has built up. You can also use a specialized RC car cleaning solution to make this step easier.
Read Also: Traxxas Maxx Review. Is It The Best One? Is It Worth It?
Step 6: Clean the Chassis
When cleaning the chassis, use a brush to get into the small spaces, especially the underside where dirt tends to accumulate. Be sure to clean off any oil spills, dirt, or gravel lodged in the openings.
Step 7: Replace the Wheels
If the wheels were damaged and you replaced them, make sure they’re securely fastened to the axles by screwing them on tightly.
Read Also: Traxxas Stampede 2WD , The Best Traxxas RC Car For Beginners.
Step 8: Dry the Car
Finally, use a clean, dry cloth to wipe down the car and ensure all parts are completely dry. This will help prevent rust or other moisture-related issues.
Congratulations, your RC car is now clean! You didn’t spend a fortune or waste any unnecessary water in the process.
Have you tried these steps yet? How did it go? Let me know in the comments!
And don’t forget to share this guide with a friend who might need to clean their RC car too!
Read Also: Traxxas T-Maxx Review . Everything You Need To Know About!
